Information The Stellar is a collaborative project between Space, Qlavier & Yiancar - this time with a hint of BlindAssassin111.
Made in Austin, TX - Enjoy!
Specifications Fluorescent Green case, frosted black plate (integrated) Custom PCB designed by Yiancar (solder or hotswap) VIA compatible (Access VIA) 6-degree typing angle
Per-key & Backlit RGB
Case thickness: 22.5mm
USB-C port
65% layout / 4-key upper right-side cluster
Designed by Qlavier & Space
Ships in a custom-branded carrying case
1.6mm PCB Check out GMK Night Runner R2 here.Also, check out the GMK Night Runner R2 companion items here.
Included
Stellar65 - Night Runner Edition Case 8-layers of masked acrylic
16 x M2 8mm screws
8 x M2 14mm brass hex standoffs
1 x 1.3mm Hex key Allen Wrench
Nebula 68B PCB Stellar65 - Night Runner Edition Feet 3-layers of masked acrylic
6 x M2 6mm screws
3 x M2 6mm brass hex standoffs
4 x 8mm * 2mm black bump-on feet
1 x 1.5mm Hex key Allen Wrench Not Included USB cable
Keycaps
Stabilizers
Switches Read about our acceptable quality standards here.
Regional Vendors EU Salvun UK ProtoTypist SEA iLumKB OCE Switchkeys CN
zFrontier KR Swagkeys CA
Ashkeebs 60-Second Build Guides:
Solder Build Guide Hotswap Build Guide Note: The Stellar65 Night Runner Edition is only aesthetically modified from the original Stellar65, its functionality remains the same - meaning the standard build guides are recommended.*Do not forget to include the support plate underneath the switch plate.
Disclaimer
Please test PCBs prior to soldering, returns or exchanges are not accepted after this point. Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.



• Fluorescent Green case, frosted black plate (integrated)
• Custom PCB designed by Yiancar (solder only)
• VIA compatible (Access VIA)
• 6-degree typing angle
• Per-key & Backlit RGB
• Case thickness: 22.5mm
• USB-C port
• 65% layout / 4-key upper right-side cluster
• Designed by Qlavier & Space
• Ships in a custom-branded carrying case
• 1.6mm PCB
• 8-layers of masked acrylic case
• 16 x M2 8mm screws
• 8 x M2 14mm brass hex standoffs
• 1 x 1.3mm Hex key Allen Wrench
• Nebula 68B PCB (solder only)
• 3-layers of masked acrylic feet
• 6 x M2 6mm screws
• 3 x M2 6mm brass hex standoffs
• 4 x 8mm * 2mm black bump-on feet
• 1 x 1.5mm Hex key Allen Wrench
• 60-Second Build Guide: Solder Build Guide

Stellar65 - Night Runner Edition

Information Check out GMK Night Runner R2 here.Also, check out the Stellar65 - Night Runner R2 Edition here.
This item is a preorder with limited units available. It is expected to ship from GMK on or before June 2023. Additionally, preorder items cannot be combined with other products in the store in a single order unrelated to Night Runner R2.
These accessories combine sleek and modern design elements with cyberpunk aesthetics, creating an immersive futuristic environment for creativity and productivity. While intended to match GMK Night Runner, they work great for that general dystopian future cyberpunk theme.
Night Runner R2 Desk Pad Specifications 35.5" x 15.75" x 5/32" - (900mm * 400mm * 4mm) 3.88 ft²
1.2lbs - (0.54kg)
Stitched edges
Cloth top (works with all mice)
Rubber bottom
Machine washable (wash on cold/gentle - air dry)
May ship early if ordered separately from other group buy items
Designed by OCM featuring the same artwork from R1 Night Runner R2 x Salvun Specifications CNC Manufactured in Belgium by Salvun
Cherry profile Escape key (row 1, 1.00 units wide)
Compatible with MX-style switches
Cerakoted Brass, laser engraved and infilled with glow enamel
May ship early if ordered separately from other group buy items Night Runner R2 Cable Specifications Fixed USB Type-C device-side connection (other options are available upon request) Fixed USB Type-A host-side connection
Cable: Double-shielded USB 2.0 Compliant 28-gauge, 4-conductor
Outer jacket: PVC
Double sleeving: 1/8" PET tech flex (Dark) and MDPC-x (Light)
Heat shrink material: Polyolefin Detachable connector: Aviator (5-pin)
Detachable Finish: CERAKOTE® Sleeving: 550 paracord Optional Coil length: 6 in (17.8 cm)
Inner coil diameter: 0.5 in (1.2 cm)
Total cable length: 5 ft (1.5 m)
Handmade by us in the USA
May ship early if ordered separately from other group buy items Regional Vendors EU Salvun UK ProtoTypist SEA iLumKB OCE Switchkeys CN
zFrontier KR Swagkeys CA
Ashkeebs Disclaimers
Kindly note that the images are of 3D renders and are for illustration purposes only. The final colors may differ slightly.
Keyboards are shown for demonstrative purposes only and are not included with the purchase of these keycaps.
By joining this group buy, you acknowledge and agree to the following: This is a group-buy/pre-order item, it is not in stock.
There can be delays and setbacks, shipping time is subject to change.
You will be charged immediately for this item. There are no refunds or cancellations on these orders. Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.



GMK Night Runner R2: 
- Preorder item with limited units available 
- Expected to ship from GMK on or before June 2023 
- Desk Pad Specifications: 35.5" x 15.75" x 5/32" - (900mm * 400mm * 4mm), 1.2lbs - (0.54kg), Stitched edges, Cloth top (works with all mice), Rubber bottom, Machine washable 
- Stellar65 - Night Runner R2 Edition: CNC Manufactured in Belgium by Salvun, Cherry profile Escape key (row 1, 1.00 units wide), Compatible with MX style switches, Cerakoted Brass, laser engraved and infilled with glow enamel 
- Cable Specifications: Fixed USB Type-C device-side connection (other options are available upon request), Fixed USB Type-A host-side connection, Cable: Double-shielded USB 2.0 Compliant 28-gauge, 4-conductor, Outer jacket: PVC, Double sleeving: 1/8" PET tech flex (Dark) and MDPC-x (Light), Heat shrink material: Polyolefin, Detachable connector: Cerakoted Aviator (5-pin), Sleeving: 550 paracord, Optional Coil length: 6 in (17.8 cm), Inner coil diameter: 0.5 in (1.2 cm), Total cable length: 5 ft (1.5 m), Handmade by us in the USA 
- Regional Vendors: EU (Salvun), UK (ProtoTypist), SEA (iLumKB), OCE (Switchkeys), CN (zFrontier), KR (Swagkeys), CA (Ashkeebs) 
- Disclaimers: Images are of 3D renders and are for illustration purposes only, Final colors may differ slightly, Keyboards are shown for demonstrative purposes only and are not included with the purchase of these keycaps, By joining this group buy, you acknowledge and agree to the following: This is a group-buy/pre-order item, it is not in stock, There can be delays and setbacks, Shipping time is subject to change, You will be charged immediately for this item, There are no refunds or cancellations.

Night Runner R2 Accessories

Information Check out the GMK Night Runner R2 companion items here.
Also, check out the Stellar65 - Night Runner Edition here. Orders open: December 1st, 2021.
Orders close: December 31st, 2021 (23:59 store’s local time).
GMK Night Runner R2 is expected to be shipped in Q4 2022. GMK Night Runner R2 is expected to be shipped in Q2 2023 or earlier. This item is a preorder with limited units available. It is expected to ship from GMK on or before June 2023. Additionally, preorder items cannot be combined with other products in the store in a single order unrelated to Night Runner R2.
GMK Night Runner R2 Specifications Made by GMK
Compatible with MX style switches
Cherry profile (1-1-2-3-4-4)
Double-shot ABS plastic
Designed by BlindAssassin111 Regional Vendors EU Salvun UK ProtoTypist SEA iLumKB OCE Switchkeys CN
zFrontier KR Swagkeys CA
Ashkeebs Disclaimers
Kindly note that the images are of 3D renders and are for illustration purposes only. The final colors may differ slightly.
Keyboards are shown for demonstrative purposes only and are not included with the purchase of these keycaps.
By joining this group buy, you acknowledge and agree to the following: This is a group-buy/pre-order item, it is not in stock.
There can be delays and setbacks, shipping time is subject to change.
You will be charged immediately for this item. There are no refunds or cancellations on these orders. Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.

(s) must be in new and unused condition, with all original tags and labels attached.  RETURN PROCESS  To return an item, please email customer service at info@example.com to obtain a Return Merchandise Authorization (RMA) number. After receiving a RMA number, place the item securely in its original packaging and include your proof of purchase, and mail your return to the following address:  Returns Department 

GMK Night Runner R2

- Orders open: December 1st, 2021. Orders close: December 31st, 2021 (23:59 store’s local time). 
- GMK Night Runner R2 is expected to be shipped in Q4 2022.  
- Made by GMK 
- Compatible with MX style switches 
- Cherry profile (1-1-2-3-4-4) 
- Double-shot ABS plastic 
- Designed by BlindAssassin111 
- Regional Vendors: EU  Salvun, UK  ProtoTypist, SEA  iLumKB, OCE  Switchkeys, CN zFrontier, KR  Swagkeys, CA Ashkeebs 
- Images are of 3D renders and are for illustration purposes only. The final colors may differ slightly. 
- Keyboards are shown for demonstrative purposes only and are not included with the purchase of these keycaps. 
- Returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. 
- All returned item(s) must be in new and unused condition, with all original tags and labels attached.

GMK Night Runner Keycaps

Information The Stellar is a collaborative project between Space, Qlavier & Yiancar.
Made in Austin, TX - Enjoy!
Sound Demos Specifications Frosted Acrylic case
Integrated Plate
Modular typing angle (6° or 8°) Case thickness: 22.5mm
65% layout (4-key upper right-side cluster)
Fixed 6.25U bottom row
Nebula68B PCB designed by Yiancar Per-key & backlit RGB
VIA compatible - (Access VIA)
USB-C port
1.6mm PCB
Updated lighting effects from the previous round Included
Stellar65 Case 8-layers of frosted acrylic
16 x M2 10mm screws
8 x M2 16mm brass hex standoffs
1 x 1.5mm hex key
Nebula 68B PCB (solder or hotswap) Stellar65 Feet 4-layers of frosted acrylic
6 x M2 6mm screws 3 x M2 6mm brass hex standoffs (6° typing angle)
3 x M2 9mm brass hex standoffs (8° typing angle)
5 x 8mm * 2mm black bump-on feet Not Included USB cable
Keycaps
Stabilizers
Switches Read about our acceptable quality standards here.
60-Second Build Guides Solder Build GuideHotswap Build Guide *Do not forget to include the support plate underneath the switch plate.
Disclaimer
Please test PCBs prior to soldering, returns or exchanges are not accepted after this point.
Note: Hotswap variants will come in custom-branded hard carrying cases, and solder variants will come in custom-branded rigid cardboard packaging Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.



• Stellar65 custom mechanical keyboard made in Austin, TX
• Frosted acrylic case with modular typing angle (6° or 8°) and case thickness of 22.5mm
• 65% layout with 4-key upper right-side cluster and fixed 6.25U bottom row
• Nebula68B PCB designed by Yiancar with per-key & backlit RGB, VIA compatible, USB-C port, and 1.6mm PCB
• Includes Stellar65 Case with 8-layers of frosted acrylic, 16 x M2 10mm screws, 8 x M2 16mm brass hex standoffs, 1 x 1.5mm hex key, and Nebula 68B PCB (solder or hotswap)
• Also includes Stellar65 Feet with 4-layers of frosted acrylic, 6 x M2 6mm screws, 3 x M2 6mm brass hex standoffs (6° typing angle), 3 x M2 9mm brass hex standoffs (8° typing angle), and 5 x 8mm * 2mm black bump-on feet
• Not included: USB cable, keycaps, stabilizers, switches

Stellar65

The NK87™ - TFUE Edition is an injection-molded TKL keyboard with a hotswap PCB assembled with recolored Silk Yellow switches and PBT dyesub keycaps.Hotswap PCB
VIA Compatible
USB C
RGB lighting (programmable via VIA)
Injection Molded Polycarbonate Case
Injection Molded Polycarbonate Plate
Yellow Coiled USB C cable included
NK_ Screw-in Stabilizers Installed
PCB/Plate Mount MX Switch Compatible (3 pin and 5 pin)
Thock Absorbers™- x8 Silicone strips between the plate and top case
Muffle Mats™ - x2 Silicone dampening pads One on the bottom, and one between the plate and PCB.
Carrying case included
Recolored NK_ Silk yellows with colors matching the case.
Includes PBT dyesub keycaps Please see the NK87 EE Acceptable Quality Standards here. Please see Dyesub Keycaps Acceptable Quality Standards here. See assembly guide and layout specification here.